Drain Milling Services

Drain milling is often used when a blockage isn't caused by ordinary debris. Sometimes, there is concrete inside the pipe, hardened scale, grout, displaced liner material, or another solid obstruction. Our engineers use specialist milling equipment to carefully remove these obstructions and restore the internal diameter of the pipe, avoiding unnecessary excavation.

New Customer Discount

10 Year Guarantee On All Repair Works

1 Hour Response Time

No Call Out Charge

Get a free quote

Reach out to PDS today and one of our friendly team will be in touch

Local Drain Unblocking

Local Drain CCTV Survey

Local Drain Repairs

Local Emergency Drainage

Local Drain Relining

Fast help is just one phone call away.

0333 577 0521

Our Service

Drain Milling

Most people call us because their drain isn’t working properly. What they don’t always realise is that the problem isn’t necessarily a blockage in the usual sense.

We’ve inspected drains where builders’ materials have entered the pipe during construction work. We’ve found old scale build-up reducing the size of the pipe by half. We’ve even come across drains partially blocked by failed repairs carried out years earlier.

In situations like these, drain milling can often provide a practical solution.

Investigating The Drain: Before any milling work begins, we need to understand exactly what’s inside the pipe. A CCTV survey allows us to see the obstruction and determine whether milling is the most suitable approach.

Assessing The Condition Of The Pipe: Not every drain is suitable for milling. We check the condition of the pipework first to make sure the process can be carried out safely without causing damage.

Removing Internal Obstructions: Using specialist rotating equipment, we carefully remove material that’s restricting the flow inside the drain. This might include concrete deposits, mortar, scale, protruding connections, or other solid obstructions.

Restoring Pipe Capacity: As material is removed, the pipe gradually returns closer to its original internal size. This allows wastewater to flow more freely and helps improve the overall performance of the drainage system.

Checking The Results Once the milling work has been completed, we inspect the drain again to confirm the obstruction has been removed and that the pipe is flowing as it should.

Recommending Any Further Work Occasionally, milling reveals other issues hidden behind the obstruction. If we find anything that requires attention, we’ll explain what we’ve seen and discuss the available options.

Why Choose Us

Drain milling isn’t something every drainage company carries out regularly. It requires the right equipment, careful planning, and a good understanding of what’s happening inside the pipe.

Experience With Complex Drain Problems

We've worked on drainage systems affected by all kinds of unusual obstructions. Some jobs are straightforward, while others require a more specialist approach.

We Investigate Before We Act

Rather than assuming what's causing the issue, we prefer to inspect the drain first. That way we can recommend a solution based on evidence rather than guesswork.

Specialist Equipment

Certain obstructions simply won't shift using conventional drain cleaning methods. Our milling equipment allows us to tackle problems that would otherwise be difficult to remove.

Less Disruption Where Possible

In many situations, drain milling can help avoid more invasive repair work. If an obstruction can be removed from within the pipe, there may be no need for excavation.

Attention To Detail

The job isn't finished just because the blockage has gone. We check the drain afterwards to make sure the pipe is clear and functioning properly.

Straightforward Advice

We'll explain what we've found, what can be done about it, and whether milling is genuinely the best option for the drain.

⭐️Our Five-Star Rating ⭐️

Top-Rated Service

We’re proud that many customers come to us after being told a drain would need extensive work, only to discover there’s a less disruptive solution available.

Testimonials

What Our Clients Say

We were told there was concrete inside part of the drain and expected the whole section would need replacing. The team carried out milling work and managed to clear it without any digging.

Really pleased with the service. They showed us the CCTV footage before and after the work so we could actually see the difference.

The drain had been causing problems for months and nobody seemed sure what was causing it. The milling removed a build-up inside the pipe and everything has been flowing properly since.

Professional from start to finish. They explained what was happening, carried out the work efficiently, and kept us updated throughout.

Request A Call Back

Need help with a drain that’s affected by concrete, scale, or another solid obstruction? Request a call back today and speak with our team. We’ll discuss the issue, arrange an inspection if needed, and advise whether drain milling is the right solution.

Available 24/7 when you need us most.

0333 577 0521

Frequently Asked Questions

1. What is drain milling used for?

Drain milling is used to remove solid obstructions from inside drainage pipes, including concrete, mortar, scale build-up, protruding connections, and other hard materials that restrict flow.

2. How is drain milling different from drain jetting?

Drain jetting uses high-pressure water to clear debris and softer blockages. Milling uses specialist cutting equipment to remove harder materials that water pressure alone may not be able to shift.

3. Can drain milling remove concrete from a pipe?

Yes. One of the most common reasons for milling is removing concrete, grout, or construction debris that has entered the drainage system.

4. Will drain milling damage the pipe?

Before any work begins, we assess the condition of the drain. When carried out correctly using suitable equipment, milling is designed to remove obstructions while protecting the surrounding pipework.

5. Do all blocked drains require milling?

No. Most blockages can be cleared using other methods. Milling is generally reserved for situations involving solid or stubborn obstructions inside the pipe.

6. Can milling be carried out without digging up the drain?

In many cases, yes. The equipment is often introduced through existing access points, allowing work to be completed internally without excavation.